Epson SureColor SC-S70600 - Using the Supplied Software; Contents of the Software Disc

To Next Page

To Previous Page

Using the Supplied Software

Contents of the Software Disc

The following applications are available on the supplied software disk. Install as required.

For information about these applications, see the Network Guide (pdf) or the on-line help for the application in

question.

Note:

❏ The supplied disk does not contain printer drivers. A software RIP is required for printing. Software not on the supplied

software disk (including software RIPs and plug-ins for this printer) is available from the Epson website.

❏ The latest applications can be downloaded from the Epson website.

For Windows

Software Name Summary

EPSON LFP Remote Panel 2 EPSON LFP Remote Panel 2 is used to update firmware from a computer and copy media settings

bank created in the printer's setup menu to a computer.

U “Starting EPSON LFP Remote Panel 2” on page 30

U “Exiting EPSON LFP Remote Panel 2” on page 30

Epson Driver and Utilities Epson communications drivers (the EPSON SC-S70600 Series Comm Driver, EPSON SC-S50600

Series Comm Driver, or EPSON SC-S30600 Series Comm Driver) are installed.

The Epson communications driver is required if the EPSON LFP Remote Panel 2 is to be used to

copy media settings. It is not a printer driver. In addition, the software RIP may not display printer

status if the Epson communications driver is not installed when the printer is connected to a

computer via USB. See the software RIP documentation for more information on the status

display.

Epson Network Utilities Install and launch a wizard that will help you enter IP addresses for a simple network connection.

EpsonNet Config With this software, you can configure various network settings for the printer from your computer.

This is useful as it allows you to enter addresses and names using the keyboard.

For Mac OS X