❏ Use only the supplied cleaning sticks or sticks
contained in maintenance kit (consumable kits,
available separately). Other types of stick that
produce lint will damage the print head.
❏ Always use fresh cleaning sticks. Re-using sticks
can make stains even harder to remove.
❏ Do not touch the ends of the sticks. Oil from your
hands could damage the print head.
❏ Do not get alcohol or water on the caps or the nozzle
surface. Ink congeals when mixed with water or
alcohol.
❏ Touch a metallic object before starting work to
discharge any static electricity.
Using Ink Cleaner
Stains on the wiper rail or the area around the print head
that can not be removed with a dry cleaning stick can be
removed using a cleaning stick to which ink cleaner has
been applied.
!
Caution:
❏ Store ink cleaner in a location out of reach of
children.
❏ Wear protective eyewear and gloves when
handling Ink Cleaner.
Should waste ink contact your skin or enter
your eyes or mouth, immediately take the
following actions:
❏ If fluid adheres to your skin, immediately wash it
off using large volumes of soapy water. Consult a
physician if the skin appears irritated or is
discolored.
❏ If fluid enters your eyes, rinse immediately
withwater. Failure to observe this precaution
could result in bloodshot eyes or mild
inflammation.
❏ If fluid is swallowed, consult a physician
immediately; do not induce vomiting.
❏ After handling Ink Cleaner, wash your hands
and gargle thoroughly.
A
Pour about 10 ml of ink cleaner into the cup
supplied with the ink cleaner.
B
Dampen the cleaning stick with ink cleaner.
Do not allow ink cleaner to drip from the
cleaning stick.
C
Wipe the spot you wish to clean.
c
Important:
❏ Ink cleaner should be used only to clean the
wiper rail and the area around the print head.
Using ink cleaner on other parts of the printer
could damage the product.
❏ Used ink cleaneris classified as industrial
waste and should be disposed of in the same
way as used ink.
❏ Store ink cleaner at room temperature out of
direct sunlight.
Regular Part Cleaning
To preserve print quality and ensure good results, clean
the print head, wiper, wiper rail, and caps as suggested
below.
❏ We recommend that cleaning be performed once a
week.
EPSON SC-S70600 series/SC-S50600 series/SC-S30600 series User's Guide
Maintenance
80
To Next Page
Loading...
