Regular Replacement Check Sheet
Print this page to track maintenance tasks.
Component to be replaced Cleaned on date Explanation
A Flushing pad / / / / / ❏ We recommend that this component
be replaced once every six months.
❏ Replace when ink stains appear on
the media or when dust or lint from
the media appear on the front of the
flushing pad.
/////
/////
/////
B Wiper /////❏ We recommend that this component
be replaced once every six months.
❏ Replace when the front of the wiper
cleaner (the absorbent parts) start to
get stained with ink.
❏ Replace the wiper when replacing the
wiper cleaner.
/////
/////
/////
C Wiper cleaner /////
/////
/////
/////
DWaste ink bottle /////❏ Place a new waste ink bottle when
waste ink reaches the line on the
current waste ink bottle.
❏ After replacing the bottle, reset the
waste ink counter.
/////
/////
/////
Note: Order consumable maintenance kits (T7241) once the contents of the supplied maintenance kit are exhausted.
Note: Leave the waste ink in the waste ink bottle for disposal; do not transfer it to another container. Replace waste ink bottles with
consumable waste ink bottles (T7240).
EPSON SC-S70600 series/SC-S50600 series/SC-S30600 series User's Guide
Maintenance
91
To Next Page
Loading...
