Regular Part Cleaning Check Sheet
Print this page to track maintenance tasks.
Component to be cleaned Cleaned on date Explanation
A Platen heater, pressure
rollers, media holding plates
/////Clean if you notice lint from print media,
dust, or ink stains.
/////
/////
/////
B Print head /////❏ We recommend that cleaning be
performed once a week.
❏ Cleaning should also be performed if
colors in the printout are faint or
missing even after head cleaning has
been performed.
❏ Complete the task within 10 minutes
to prevent the print head drying out.
❏ Be sure to use a narrow cleaning stick
to clean between the nozzles (the
four areas shown in Figure B).
Touching the nozzle surface with the
cleaning stick could damage the print
head.
❏ Use consumable ink cleaner (T6993)
for stains that can not otherwise be
removed.
/////
/////
/////
C Wiper /////
/////
/////
/////
D Caps /////
/////
/////
/////
EWiper rail /////
/////
/////
/////
EPSON SC-S70600 series/SC-S50600 series/SC-S30600 series User's Guide
Maintenance
90
To Next Page
Loading...
