Item Parameter Explanation
Waste Ink Counter - Use this item to reset the waste ink counter after placing a new waste ink
bottle. Only reset the counter when replacing the waste ink bottle.
Resetting the counter before the waste ink bottle is replaced will result in
the printer being unable to accurately track the waste ink level.
The Ink Level Menu
Item Explanation
You can see the level of each ink cartridge. When you replace an
ink cartridge, the remaining ink level is automatically reset.
The Print Logs Menu
These items are used to track consumables.
Item Parameter Explanation
Print Job Log Sheet Print You can print the job information saved in the printer (up to 10
jobs). The information includes the media and ink used in each job,
making it easier to track the use of consumables.
Show Total Prints
XXXXXX m
2
(XXXXXX ft
2
)
Select Show Total Prints to view the total area of media printed (to
a maximum of six figures).
The Printer Status Menu
These items track printer use and settings.
Item Parameter Explanation
Print Status Sheet Print Print a status sheet showing current printer settings, and the
status of periodical replacement parts. Use this option to view a
variety of information about the printer on a single sheet and help
schedule the periodic replacement of parts.
myEpsonPrinter Status Not Started, Disabled,
Enabled
You can see if myEpsonPrinter is enabled or disabled. If it is
enabled, the last uploaded time is displayed. This function is not
supported in some areas and some countries.
Last Uploaded:, (Not
Uploaded), MM/DD/YY
HH:MM GMT
Firmware Version XXXXXXX,X_XX,XXXX View the printer Firmware Version.
EPSON SC-S70600 series/SC-S50600 series/SC-S30600 series User's Guide
Using the Control Panel Menu
108
To Next Page
Loading...
