G
Remove the wiper.
Holding the wiper by the attachment point, tilt it
left and lift it out.
H
Insert new wiper.
Place on the attachment point and press down
until you hear a click.
Users of the SC-S70600 series or SC-S50600
series will need to return to Step 5 and replace the
remaining wiper.
I
Close the maintenance cover and press the Z
button.
J
The menus will close when the print head returns
to its normal position.
Replacing the Flushing Pad
Replace the flushing pad as directed below:
❏ Once every six months
❏ When ink stains appear on the media
❏ When dust or lint from the media appears on the
front of the flushing pad
Buttons that are used in the following settings
A
Confirm that the printer is on and press #.
The Maintenance menu will be displayed.
B
Use the d/u buttons to select Head
Maintenance and press the Z button.
C
Press the Z button to move the print head to the
cleaning position.
D
Open the right maintenance cover.
EPSON SC-S70600 series/SC-S50600 series/SC-S30600 series User's Guide
Maintenance
88
To Next Page
Loading...
