Buttons that are used in the following settings
A
Confirm that the printer is on and press #.
The Maintenance menu will be displayed.
B
Use the d/u buttons to select Head
Maintenance and press the Z button.
C
Press the Z button to move the print head to the
cleaning position.
D
Open the right maintenance cover.
E
Remove the wiper cleaner.
Grasp the cleaner as shown and lift it from the
printer.
F
Insert a new wiper cleaner.
Place on the attachment point and press down
until you hear a click.
EPSON SC-S70600 series/SC-S50600 series/SC-S30600 series User's Guide
Maintenance
87
To Next Page
Loading...
