F Wiper cleaner
The wiper cleaner removes ink from the wiper. It is a consumable; replace about once every six months.
U “Replacing the Wiper and Wiper Cleaner” on page 86
G Caps
Except during printing, these caps cover the print head nozzles to prevent them drying out. We recommend that
this unit be cleaned once a week.
U “Regular Part Cleaning” on page 80
H Wiper
The wiper removes ink from the print head nozzles. We recommend that this unit be cleaned once a week. It is a
consumable; replace about once every six months.
U “Regular Part Cleaning” on page 80
U “Replacing the Wiper and Wiper Cleaner” on page 86
I Flushing pad
Ink is discharged onto this pad during flushing. It is a consumable; replace about once every six months.
U “Replacing the Flushing Pad” on page 88
Back
A Drive switch
The drive switch is used to feed the media during loading and to rewind the media for replacement.
B Roll holder
Place media on these holders. There are two lift levers: one on the left and one on the right.
EPSON SC-S70600 series/SC-S50600 series/SC-S30600 series User's Guide
Introduction
16
To Next Page
Loading...
