❏ The media remaining is not displayed if Off is selected
for Remaining Setup in the Media Remaining menu.
U “The Media Setup Menu” on page 100
D Ink cartridge status
Displays the approximate level of remaining ink and
the current status. When ink runs low or an error
occurs, the display changes as shown below.
Normal Warning or error
1 Status indicators
The ink cartridge status is indicated as follows.
: Ready to print. The height of the
indicator changes with the level of ink
remaining.
: Ink is low. You need to prepare a new
ink cartridge.
: The level of ink remaining has reached
the limit; replace with a new cartridge.
: The ink cartridge is not latched. Lower
the lock lever to engage the latch.
: No ink cartridge is inserted. Insert the
ink cartridge and lower the lock lever to
engage the latch.
: An error occurred. Check the message
on the screen, and clear the error.
: A Cleaning cartridge is installed. The
height of the indicator changes with the
level of cleaning fluid remaining.
Note:
You can also check the level of ink remaining using the
Ink Level option in the menus.
U “The Ink Level Menu” on page 108
2Ink color codes
SC-S70600 Series
MS : Metallic Silver
LK : Light Black
BK : Black
C:Cyan
M:Magenta
Y:Yellow
OR : Orange
LC : Light Cyan
LM : Light Magenta
WH : White
SC-S50600 Series
WH : White
BK : Black
Y:Yellow
M:Magenta
C:Cyan
SC-S30600 Series
BK : Black
Y:Yellow
M:Magenta
C:Cyan
E Waste ink bottle status
Displays the approximate amount of space available
in the waste ink bottle. The display changes as shown
below when the waste ink bottle is nearly full or an
error occurs .
Normal Warning or error
EPSON SC-S70600 series/SC-S50600 series/SC-S30600 series User's Guide
Introduction
21
To Next Page
Loading...
