❏ Extra ink is required to fully charge the print head
nozzles the first time the printer is used;
replacement cartridges will be needed earlier than
usual. Store ink cartridges at room temperature in a
location that is not exposed to direct sunlight.
❏ Store ink cleaner at room temperature out of direct
sunlight.
❏ To ensure print quality, use all the ink in the
cartridge before the earlier of the following dates:
❏ The expiry date shown on the ink cartridge
packaging
❏ Six months after opening the package of ink
cartridge
❏ If you move ink cartridges from a cold place to a
warm place, leave it at room temperature for more
than four hours before using the ink cartridge.
❏ Do not touch the ink cartridge IC chip. You may not
be able to print properly.
❏ Fill all slots using ink or replacement cartridges
(replacement cartridges are required in 8 and 4
color modes). You cannot print if any of the slots are
empty.
❏ Do not leave the printer without ink cartridges
installed. The ink in the printer will dry out and the
printer will not function as expected. Leave ink
cartridges or replacement cartridges in all slots even
when the printer is not in use.
❏ Because the green IC chip contains the cartridge's
own information such as the remaining ink level,
you can still reinstall and use the ink cartridge after
removing it from the printer.
❏ Use a cleaning stick from the supplied maintenance
kit to wipe ink from the ink supply port of cartridges
that have been removed from the printer before all
the ink is used. Dried ink on the supply port may
cause ink leaks when the cartridge is reinserted and
used.
While cartridges are in storage, keep the ink supply
ports free of dust. The ink supply port has a valve in
it so it does not need to be capped.
❏ Removed ink cartridges may have ink around the
ink supply port, so be careful not to get any ink on
the surrounding area when removing the
cartridges.
❏ To maintain the quality of the print head, this
printer stops printing before ink cartridges are
completely expended.
❏ Although the ink cartridges may contain recycled
materials, this does not effect printer function or
performance.
❏ Do not dismantle or remodel ink cartridges. You
may not be able to print properly.
❏ Do not drop or knock it against hard objects;
otherwise, the ink may leak.
❏ With the exception of specialty (white and metallic
silver inks), ink cartridges must be removed and
thoroughly shaken once every three weeks.
Shaking ink cartridges U “How to replace” on
page 92
❏ Do not insert or remove replacement cartridges
during printing.
EPSON SC-S70600 series/SC-S50600 series/SC-S30600 series User's Guide
Introduction
26
To Next Page
Loading...
