L
Go to the front of the printer and open the front
cover.
M
Hold the center of the media and raise the media
loading lever.
N
Pull the media straight forward until the edge has
past the label on the left side of the after heater.
Keep the right edge of the media parallel with the
scale markings on the two labels on the right side
of the after heater.
O
Lower the media loading lever to hold the media
in place.
To print immediately, proceed to Step 16.
For information on loading the media into the
auto take-up reel unit, see:
U “Using the Auto Take-up Reel Unit” on
page 55
EPSON SC-S70600 series/SC-S50600 series/SC-S30600 series User's Guide
Basic Operations
51
To Next Page
Loading...
