Buttons that are used in the following settings
Choosing a Media Setting Bank
A
After confirming that the printer is ready, press
the Menu button.
The settings menu will be displayed.
B
Select Media Setup and press the Z button.
C
Use the d/u buttons to select Customize
Settings and press the Z button.
D
Use the d/u buttons to select a media setting
bank number between 1 and 30 and then press
the Z button.
Note that any settings already saved in the printer
will be overwritten.
Setting Name
Name the media setting bank. Using distinctive names
makes it easier to select banks for use.
A
Select Setting Name and press the Z button.
B
Use the d/u buttons to display letters and
symbols. When the desired character is
displayed, press the r button to select the next
entry position.
Mistakes can be erased by pressing the l button
to delete the previous character and move the
cursor back one spot.
C
After entering the name, press the Z button.
Feed Adjustment
Feed Adjustment is used to correct banding (horizontal
banding, lines, or strips of uneven color).
The Feed Adjustment menu contains two options:
Auto and Manual.
Auto feed adjustment adjusts the feed automatically
using data collected by a sensor while a test pattern is
printed.
In manual feed adjustment, the user visually inspects
print results and enters a correction by hand.
This section details the steps involved in auto feed
adjustment.
Adjust the feed manually if you feel that auto feed
adjustment has not completely resolved the problem.
For more information on manual feed adjustment, see
U “Feed Adjustment (Manual Feed Adjustment)” on
page 67.
EPSON SC-S70600 series/SC-S50600 series/SC-S30600 series User's Guide
Basic Operations
62
To Next Page
Loading...
