On : An error occurred. Check the contents of the error on the control panel's screen.
Off : No error.
S AC inlet #1/AC inlet #2
Connects the power cable. Be sure to connect both cables.
T LAN port
U “LAN port” on page 17
U USB port
Connects the USB cable.
V Maintenance cover (right)
Open this cover when performing regular maintenance. Normally closed when using the printer.
U “Regular Maintenance” on page 79
W Media loading lever
After loading media, lower the media loading lever to keep the media in place. Raise the lever to release the media
prior to removal.
X Alert lamp
This lamp lights or flashes when an error occurs.
On
Flashing
: An error occurred; the type of error is indicated by how the lamp lights or flashes. Check the
contents of the error on the control panel's screen.
Off : No error.
Y Control panel
U “Control panel” on page 19
Z Front cover
Open when loading media, cleaning the inside of the printer, or removing jammed media. Normally closed when
using the printer.
EPSON SC-S70600 series/SC-S50600 series/SC-S30600 series User's Guide
Introduction
9
To Next Page
Loading...
