25
Chapter 1 Product Overview
Maintenance Counter
With this function, printer information, such as the number of lines printed, the number of autocuts, and
printer operation time after the printer starts working, is automatically stored in NV memory.
• You can also check the head running length and number of times of autocutting with the self-test
(see "Self-test Mode" on page 71).
• T
he maintenance counter values are automatically saved in the NV memory usually every two
minutes (up to four minutes). However, the values are not saved when the printer is in power-
saving mode or when it is turned off without the use of the power switch.
To Next Page
Loading...
