Epson TM-T88VII User Manual

41
Chapter 2 Setup
Pin assignments
Connecting the drawer kick cable
Connect the drawer kick cable to the drawer kick connector by pressing firmly until the connector clicks into
place.
Pin number Signal name Direction
1Frame GND -
2 Drawer kick drive signal 1 Output
3 Drawer kick open/close signal Input
4 +24 V -
5 Drawer kick drive signal 2 Output
6Signal GND -
WARNING
• Use a shield cable for the drawer kick cable.
• When using cash drawer, make sure to use the power supply for printer (connector pins 4).
• Do not insert a telephone line into the drawer kick connector.
Doing so may damage the telephone line or printer.
6 5 4 3 2 1

Epson TM-T88VII Specifications

General

Product color	Black
Type	POS printer
Character sets	ANK
Character size	1.41 x 3.39 mm
Print technology	Thermal
Maximum resolution	180 x 180 DPI
USB port	Yes
USB connector	USB Type-A / USB Type-B
Optional connectivity	Wireless LAN
Connectivity technology	Wired & Wireless
Wi-Fi	-
Media thickness	48 - 80 mm
Maximum roll diameter	83 mm
Supported paper width	80 mm
AC input voltage	24 V
Power consumption	28600 mA
Power consumption (standby)	1.4 W
Power consumption (printing)	28.6 W
Certification	CE
Internal memory	- MB
Country of origin	Philippines
Mounting position	Horizontal/Vertical
Autocutter durability	3 million cuts
Built-in sensors details	Paper End Sensor, Paper Near End Sensor, Cover Open Sensor, Receipt paper sensor
Sound pressure level (printing)	52 dB
Mean time between failures (MTBF)	360000 h
Storage temperature (T-T)	-10 - 50 °C
Operating temperature (T-T)	5 - 45 °C
Operating relative humidity (H-H)	10 - 90 %
Mean cycles between failures (MCBF)	70000000
Package depth	235 mm
Package height	260 mm
Package weight	2704 g
Quantity per pack	1 pc(s)
Pre-installed software	Server Direct Print, ePOS-Device, ePOS-Display, ePOS-Print
Pallet weight	0 g
Quantity per pallet	112 pc(s)
Quantity per pallet (UK)	168 pc(s)
Harmonized System (HS) code	84433210

Weight and Dimensions

Depth	195 mm
Width	145 mm
Height	148 mm