Epson TM-T88VII User Manual

73
Chapter 3 Advanced Usage
Software Setting Mode
Set the printer's memory switches and customized values.
• Print density
• Auto reduction of amount of paper to use
• Enabling/disabling paper autocutting at cover close
• Paper width setting
• Auto replacement of font
• Print speed
• Command execution (offline)
• Specification for the top margin by backfeed
• Optional external buzzer control
• Interface setting
• Communication conditions using a serial interface
• Communication conditions using a USB interface
• Interface switch wait time
• Main interface selection
• Power supply capacity
• Automatic line feed
• Select paper sensor(s) to output paper-end signals
• ERROR signal when an error occurs
• Thai Character Composition
• Character code table defaults
• International character defaults
Follow the steps below.
1
After running a self-test, hold down the Feed button for at least one second to enter
the Mode selection.
The Mode selection guidance is printed, and the Paper LED flashes.
2
Briefly press the Feed button three times (less than one second), hold it down for at
least one second to enter the Software settings mode (Customized value setting).
The Software setting mode guidance is printed, and the Paper LED flashes.
For details on the memory switches and customized values, see "Software Settings" on page 59.

Epson TM-T88VII Specifications

General

Product color	Black
Type	POS printer
Character sets	ANK
Character size	1.41 x 3.39 mm
Print technology	Thermal
Maximum resolution	180 x 180 DPI
USB port	Yes
USB connector	USB Type-A / USB Type-B
Optional connectivity	Wireless LAN
Connectivity technology	Wired & Wireless
Wi-Fi	-
Media thickness	48 - 80 mm
Maximum roll diameter	83 mm
Supported paper width	80 mm
AC input voltage	24 V
Power consumption	28600 mA
Power consumption (standby)	1.4 W
Power consumption (printing)	28.6 W
Certification	CE
Internal memory	- MB
Country of origin	Philippines
Mounting position	Horizontal/Vertical
Autocutter durability	3 million cuts
Built-in sensors details	Paper End Sensor, Paper Near End Sensor, Cover Open Sensor, Receipt paper sensor
Sound pressure level (printing)	52 dB
Mean time between failures (MTBF)	360000 h
Storage temperature (T-T)	-10 - 50 °C
Operating temperature (T-T)	5 - 45 °C
Operating relative humidity (H-H)	10 - 90 %
Mean cycles between failures (MCBF)	70000000
Package depth	235 mm
Package height	260 mm
Package weight	2704 g
Quantity per pack	1 pc(s)
Pre-installed software	Server Direct Print, ePOS-Device, ePOS-Display, ePOS-Print
Pallet weight	0 g
Quantity per pallet	112 pc(s)
Quantity per pallet (UK)	168 pc(s)
Harmonized System (HS) code	84433210

Weight and Dimensions

Depth	195 mm
Width	145 mm
Height	148 mm