Epson TM
U220 Reference Guide

Rev. E Notices for Replacement of the TM-U210/TM-U300 6-3
TM-U220 Technical Reference Guide
6.1.2 Cutting Method
The partial cut method for the TM-U220 (Type A, B) is a little different from the TM-U210. The
TM-U210 always uses the partial cut method. The partial cut method is one point left uncut at
the center position, so the method is different from that of the TM-U220 in respect to the uncut
position. The TM-U220 leaves the right position uncut in the partial cut.
Print start position line
Manual cut position line
22.1 mm
Paper feed direction
TM-U210 (Type A, B, D)
TM-U220 (Type A, B)
Print start position line
Auto cut position line
Manual cut position line
27 mm
34.9 mm
Paper feed direction
Print start position line
Manual cut position line
22.1 mm
Paper feed direction
These values are reference values
(When using 76mm roll paper)
TM-U220 (Type D)
(When using 76mm roll paper)

Epson TM
U220 Specifications

General

Print speed	4.7 lps
Character size	1.6 x 3.1 mm
Print technology	Dot matrix
Paper dimensions	57.5±0.5/69.5±0.5/76±0.5 x 83.0
Dimensions (WxDxH)	160 x 286 x 157.5 mm
Certification	WEEE/RoHS
Mean time between failures (MTBF)	180000 h
Parallel connector	Yes
Standard interfaces	Parallel