Epson TM
U220 Reference Guide

Rev. E Setup 3-23
TM-U220 Technical Reference Guide
❏ Receive buffer full release condition
Press the FEED button the number of times required to select the desired receive buffer full
release condition setting.
❏ Paper width setting
Press the FEED button the number of times required to select the desired roll paper width setting
(Customize value.)
Note:
See “Adjusting Roll paper width” (page 3-24) also to adjust roll paper width.
❏ Cover open status
Press the FEED button the number of times required to select the desired the mapping of cover
open status setting.
Press FEED button Receive buffer full release condition
0 times: No change
1 time: 256 bytes remain (Msw 8-7: Off)
2 times: 138 bytes remain (Msw 8-7: On)
3 or more times: No change
Press FEED button Selecting paper width
0 times: No change
1 time: 76 mm
2 times: 69.5 mm
3 times: 58.5 mm
4 or more times: No change
Press FEED button Setting selected
0 times: No change
1 time: Paper out (Msw 8-8: OFF)
2 times: Cover open (Msw 8-8: ON)
3 or more times: No change

Epson TM
U220 Specifications

General

Print speed	4.7 lps
Character size	1.6 x 3.1 mm
Print technology	Dot matrix
Paper dimensions	57.5±0.5/69.5±0.5/76±0.5 x 83.0
Dimensions (WxDxH)	160 x 286 x 157.5 mm
Certification	WEEE/RoHS
Mean time between failures (MTBF)	180000 h
Parallel connector	Yes
Standard interfaces	Parallel