Epson TM
U220

B-8 How to Install the Printer on a Wall with the WH-10 Rev. E
B.1.7 Mounting the printer on the wall
CAUTION:
When mounting the printer, make sure that the wall-mount is securely fastened to the
wall.
When the brackets are attached properly for the TM-U220B/U220D, the printer’s
operation panel will be on the top and the connector side on the bottom. If this is not
the case, please see the installing the brackets section and reattach the brackets in the
proper position.
Slide the brackets into the slots of the wall-mount, starting with the top bracket.