Epson U220B - TM Two-color Dot-matrix Printer Technical Reference Guide

Rev. D Setup 3-35
TM-U220 Technical Reference Guide
Outline of install and Setup procedure is as follows.
START
1. Installation OPOS ADK
(Execute the Setup.exe in DISK1, and continue to installation by wizard)
Is installation completed?
2. Setup the OPOS & device setting by using SetupPOS utility
You can setup the OPOS and device setting by the SetupPOS utility.
2.1 Setup the OPOS & device setting
Completed
ERROR
For detail refer to
[ User Manual]
❏ Select the device and I/F setting
❏ Device specified setting
• Paper type & size setting
•Bitmap setting

Epson U220B - TM Two-color Dot-matrix Printer Specifications

General

Print Method	9-pin, serial impact dot matrix
MTBF	180, 000 hours
Weight	Approx. 2.5 kg
Data Buffer	4 KB or 40 bytes
Paper Handling	Friction feed
Character Set	95 Alphanumeric, 128 x 12 Graphic
Paper Dimensions	58, 70, 76 mm
Interface	USB, Serial (RS-232C), Parallel (IEEE-1284)
Reliability	18 million lines
Dimensions	160 (W) x 248 (D) x 139 (H) mm
Inked Ribbon	ERC-38
Color Support	Two-color printing (Black and Red)
Print Speed	4.7 LPS (lines per second) at 40 columns, 6.0 LPS at 30 columns
Character Size	1.2 × 3.1 mm (W × H) / 1.6 × 3.1 mm (W × H)