Epson WF-2960 Series - Changing the Connection from Wi-Fi to USB; Changing the Connection from Wi-Fi to Wired LAN

Related Information
& “Making Settings for Connecting to the Computer” on page 122
Changing the Connection from Wi-Fi to USB
Follow the steps below if the Wi-Fi you are using is unstable, or if you want to change to a more stable USB
connection.
1.
Connect the printer to a computer using a USB cable.
2.
Select a printer that is not labeled (XXXXX) when printing using a USB connection.
Your printer name or "Network" is displayed in XXXX depending on the operating system version.
Example of Windows 11
Example of Windows 10
Related Information
& “Rear” on page 20
Changing the Connection from Wi-Fi to Wired LAN
If the Wi-Fi you are using is unstable, or if you want to change to a more stable wired LAN connection, follow
these instructions.
1.
Select Settings on the home screen.
2.
Select General Settings > Network Settings > Wired LAN Setup.
In These Situations > Adding or Changing the Printer's Connection > Changing the Connection from Wi-Fi to Wi …
136