Epson WF-2960 Series - Cannot Operate the Printer as Expected; The Printer Does Not Turn on or off

Related Information
& “Maintenance Box Handling Precautions” on page 193
& “Maintenance Box Code” on page 207
Cannot Operate the Printer as Expected
The Printer Does Not Turn On or O
Power Does Not Turn On
e following causes can be considered.
The power cord is not plugged in properly to the electrical outlet.
Solutions
Make sure the power cord is securely plugged in.
The P button was not pressed for long enough.
Solutions
Hold down the
P button for a little longer.
Power Does Not Turn O
The P button was not pressed for long enough.
Solutions
Hold down the
P button for a little longer. If you still cannot turn o the printer, unplug the power cord.
To prevent the print head from drying out, turn the printer back on and turn it o by pressing the
P
button.
Power Turns
O
Automatically
The Power O Settings or Power O Timer feature is enabled.
Solutions
❏ Select Settings > General Settings > Basic Settings > Power O Settings, and then disable the Power
O
If Inactive and Power
O
If Disconnected settings.
❏ Select Settings > General Settings > Basic Settings, and then disable the Power O Timer Setting.
Note:
Your product may have the Power O Settings or Power O Timer feature depending on the location of purchase.
Solving Problems > Cannot Operate the Printer as Expected > The Printer Does Not Turn On or O
195