Epson WF-2960 Series - Page 166

❏ Windows
Click Settings next to the Borderless checkbox on the printer driver's Main tab, and then change the
settings.
❏ Mac OS
Change the Expansion setting from the print dialog's Print Settings menu.
Aspect ratio of the image data and the paper size is dierent.
Solutions
If the aspect ratio of the image data and the paper size is dierent, the long side of the image is cropped if
it extends beyond the long side of the paper.
The Position, Size, or Margins of the Printout Are Incorrect
e
following causes can be considered.
The paper is loaded incorrectly.
Solutions
Load paper in the correct direction, and slide the edge guide against the edge of the paper.
& “Loading Paper” on page 28
The size of the paper is set incorrectly.
Solutions
Select the appropriate paper size setting.
The margin setting in the application software is not within the print area.
Solutions
Adjust the margin setting in the application so that it falls within the printable area.
& “Printable Area” on page 229
Solving Problems > Printing, Copying, Scanning, and Faxing Quality is Poor > Print Quality is Poor
166