Epson WF-C5890 User Manual

339
Note: IPsec is supported only by computers running Windows Vista or later, or Windows Server 2008 or
later.
Parent topic: Configuring IPsec/IP Filtering
Configuring Default IPsec/IP Filtering Policy
You can configure the default policy for IPsec/IP traffic filtering using Web Config.
1. Access Web Config and select the Network Security tab.
2. Under IPsec/IP Filtering, select Basic.
3. Select Enable to enable IPsec/IP filtering.
4. Select the filtering options you want to use for the default policy.
5. Click Next.
You see a confirmation message.
6. Click OK.
Parent topic: Configuring IPsec/IP Filtering
Configuring Group IPsec/IP Filtering Policies
You can configure group policies for IPsec/IP traffic filtering using Web Config.
1. Access Web Config and select the Network Security tab.
2. Under IPsec/IP Filtering, select Basic.
3. Click a tab number for the policy number you want to configure.
4. Select the Enable this Group Policy checkbox.
5. Select the filtering options you want to use for this group policy.
6. Click Next.
You see a confirmation message.
7. Click OK.
8. If you want to configure additional group policies, click the next tab number and repeat the
configuration steps as necessary.
Parent topic: Configuring IPsec/IP Filtering

Epson WF-C5890 Specifications

General

Print Technology	PrecisionCore Heat-Free Technology
Print Resolution	4800 x 1200 dpi
Duplex Printing	Yes
Connectivity	USB, Ethernet, Wi-Fi, Wi-Fi Direct
Display	4.3" color touchscreen
Weight	50.7 lbs
Maximum Paper Size	8.5" x 47.2"
Scan Resolution	1200 x 2400 dpi
Duplex Scanning	Yes
Fax	Yes
Max Print Speed	25 ppm (black/color)
Mobile Printing	Apple AirPrint
Scanner Type	Color flatbed and ADF
Ink Cartridge Configuration	4 individual cartridges (black, cyan, magenta, yellow)