10. Click Next.
11. Select Type of wireless network.
12. Configure the security setting, and then click Next.
The IP Address Settings screen appears.
13. Select IP Mode depending on your network scheme.
When IPv4 is selected, configure the following:
a
Select Type.
b
If you have selected Use Manual Address from Type, enter the following items:
❏ IP Address of your printer
❏ Subnet Mask
❏ Gateway Address
When Dual Stack is selected, configure the following:
a
Configure IPv4 Settings.
AL-M200 Series User’s Guide
Printer Connection and Software Installation 44
To Next Page
Loading...
