Epson WorkForce Pro WF-3730 Series - Advanced Fax Configuration; Making Basic Fax Settings Individually; Settings for PBX Phone System

Making Basic Fax Settings Individually
You can make fax settings without using the fax setting wizard by selecting each setting menu individually. e
settings congured using the wizard can also be changed. For more details, see the list of menus in fax settings.
Related Information
& “Fax Settings” on page 129
Making Settings for a PBX Phone System
Make the following settings when using the printer in oces that use extensions and require external access codes,
such as 0 and 9, to get an outside line.
1. Tap Settings on the home screen.
2. Tap General Settings > Fax Settings > Basic Settings.
3. Tap Line Type, and then tap PBX.
4. When sending a fax to an outside fax number using # (hash) instead of the actual external access code, tap the
Access Code box to make this to Use.
e #, entered instead of the actual access code, is replaced with the stored access code when dialing. Using #
helps avoid connection problems when connecting to an outside line.
Note:
You cannot send faxes to recipients in Contacts that have external access codes such as 0 and 9.
If you have registered recipients in Contacts using an external access code such as 0 and 9, set the Access Code to Do
Not Use. Otherwise, you must change the code to # in Contacts.
5. Tap the Access Code input box, enter the external access code used for your phone system, and then tap OK.
6. Select OK to apply the settings.
e access code is stored in the printer.
Making Paper Source Settings to Receive Faxes
You can set the printer so that specic paper sources are not used for printing received documents and fax reports.
By default, all of the paper sources are enabled for fax printing. Use this feature if you do not want to use paper in a
specic
paper source for fax printing.
1. Tap Settings on the home screen.
2. Tap General Settings > Printer Settings > Paper Source Settings > Auto Select Settings > Fax.
3. Tap each box of the paper source that you do not want to use for printing faxes.
e paper source setting is changed to O and is disabled for printing faxes.
User's Guide
Faxing
114