Epson WorkForce Pro WF-3730 Series - Managing Wi-Fi Direct and Network Defaults; Disconnecting Wi-Fi Direct (Simple AP)

1. Tap on the home screen.
2.
Select Wi -F i ( R e c o m m e n de d ) .
e network status is displayed.
3.
Tap Change Settings.
4. Select Others > Disable Wi-Fi.
5. Check the message, and then start setup.
6. When a completion message is displayed, close the screen.
e screen automatically closes aer a specic length of time.
7. Close the Network Connection Settings screen.
8. Press the
button.
Disconnecting Wi-Fi Direct (Simple AP) Connection
from the Control Panel
Note:
When Wi-Fi Direct (Simple AP) connection disabled, all computers and smart devices connected to the printer in Wi-Fi
Direct (Simple AP) connection are disconnected. If you want to disconnect a specic device, disconnect from the device
instead of the printer.
1. Tap on the home screen.
2.
Select Wi -Fi D i r e c t.
e Wi-Fi Direct information is displayed.
3.
Tap Change Settings.
4. Select Disable Wi-Fi Direct.
5. Tap the Disable the settings.
6.
When a completion message is displayed, close the screen.
e screen automatically closes aer a specic length of time.
7. Close the Network Connection Settings screen.
User's Guide
Network Settings
39