Epson WorkForce Pro WF-3730 Series - Running Web Config on a Web Browser; Running Web Config on Windows

Running Web Cong on a Web Browser
1. Check the printer's IP address.
Tap the network icon on the printer's home screen, and then tap the active connection method to
conrm
the
printer's IP address.
Note:
You can also check the IP address by printing the network connection report.
2.
Launch a Web browser from a computer or smart device, and then enter the printer's IP address.
Format:
IPv4: http://the printer's IP address/
IPv6: http://[the printer's IP address]/
Examples:
IPv4: http://192.168.100.201/
IPv6: http://[2001:db8::1000:1]/
Note:
Using the smart device, you can also run Web Cong from the maintenance screen of Epson iPrint.
Related Information
& “Using Epson iPrint” on page 80
& “Printing a Network Connection Report” on page 32
Running Web
Cong
on Windows
When connecting a computer to the printer using WSD, follow the steps below to run Web Cong.
1. Open the printer list on the computer.
❏ Windows 10/Windows Server 2016
Click on the start button, and then select Windows System > Control Panel > Vi e w d e v i c e s a nd p r i nt ers in
Hardware and Sound.
❏ Windows 8.1/Windows 8/Windows Server 2012 R2/Windows Server 2012
Select Desktop > Settings > Control Panel > Vi e w d e v i c e s an d pri n te r s in Hardware and Sound (or
Hardware).
❏ Windows 7/Windows Server 2008 R2
Click the start button, and select Control Panel > Vi e w d e v i c e s an d p ri n ter s in Hardware and Sound.
❏ Windows Vista/Windows Server 2008
Click the start button, and select Control Panel > Printers in Hardware and Sound.
2. Right-click on your printer and select Properties.
3.
Select the Web S er vi ce tab and click the URL.
User's Guide
Network Service and Software Information
161