Epson WorkForce Pro WF-3730 Series - Email Server Setting Items Explained; Email and Connection Troubleshooting; Checking Email Server Connection

6. Tap Proceed.
Note:
❏ If an error message is displayed, check if the email server settings are correct.
❏ When you cannot send an email even if the connection check succeeds, check the authentication method for the
email server you are using.
Related Information
& “Email Server Setting Items” on page 220
Email Server Setting Items
Items Explanations
Authenticated Account
If you select SMTP-AUTH or POP Before Smtp as the Email
Server Authentication Method, enter the user name (email
address) registered to the email server within 255 characters
or less.
Authenticated Password
If you select SMTP-AUTH or POP Before Smtp as the Email
Server Authentication Method, enter the password of the
authenticated account within 20 characters or less.
Sender's Email Address Specify the email address that the printer uses to send
emails. You can specify the existing email address. To make it
clear that the email is being sent from the printer, you can
acquire an address specically for the printer and enter it
here.
SMTP Server Address Enter the server address of the server that sends the email
(SMTP server).
SMTP Server Port Number Enter the port number of the server that sends the email
(SMTP server).
POP3 Server Address
If you select POP Before Smtp as the Email Server Authen-
tication Method, enter the server address of the server that
receives the email (POP3 server).
POP3 Server Port Number
If you select POP Before Smtp as the Email Server Authen-
tication Method, enter the port number of the email server
that receives the email (POP3 server).
Secure Connection
If you select SMTP-AUTH or O as the Email Server Au-
thentication Method, select the method of the secure con-
nection.
Checking an Email Server Connection
1. Tap Settings on the home screen.
2. Tap General Settings > Network Settings > Advanced.
User's Guide
Appendix
220