Epson WorkForce Pro WF-3730 Series - Using Email Server Features; Configuring Mail Server Settings

Related Information
& “Printing a Network Status Sheet” on page 36
Using an Email Server
To use email features, you need to congure the email server.
Conguring Mail Server
Check the following before conguring the email server.
❏ e printer is connected to the network.
❏ e email server information, such as the documents from your service provider that you used to setup the
email on your computer.
Note:
If you use a free email service, such as Internet email, search the Internet to get the email server information you need.
1. Select Settings on the home screen.
2. Select General Settings > Network Settings > Advanced.
3.
Select Email Server > Server Settings.
4. Tap the authentication method of the email server you are using, and then the settings screen is displayed.
c
Important:
e
following authentication methods are available.
❏
O
❏ POP Before Smtp
❏ SMTP-AUTH
Contact your internet service provider to conrm the authentication method of the email server.
e printer may not be able to communicate with an email server even if the authentication method is
available since security may be enhanced (for example SSL communication is necessary). Visit the Epson
support website for the latest information.
http://www.epson.eu/Support (Europe)
http://support.epson.net/ (outside Europe)
5. Make the appropriate settings.
e
necessary settings vary depending on the authentication method. Enter the information for the email
server you are using.
User's Guide
Appendix
219