Epson WorkForce Pro WF-3730 Series - Power and Control Panel Problems; Power Does Not Turn on; Power Does Not Turn off; Power Turns off Automatically

❏ Do not load originals above the line indicated by the triangle symbol on the ADF.
❏ Check that the ADF icon is on at the bottom of the screen. If it is o, place the originals again.
Related Information
& “Available Originals for the ADF” on page 48
& “Placing Originals on the ADF” on page 48
& “Cleaning the ADF” on page 147
Power and Control Panel Problems
Power Does Not Turn On
❏ Make sure the power cord is securely plugged in.
❏ Hold down the
P button for a little longer.
Power Does Not Turn O
Hold down the P button for a little longer. If you still cannot turn o the printer, unplug the power cord. To
prevent the print head from drying out, turn the printer back on and turn it o by pressing the
P button.
Power Turns O Automatically
❏ Tap Settings > General Settings > Basic Settings > Power O Settings, and then disable the Power O If
Inactive and Power O If Disconnected settings.
User's Guide
Solving Problems
177