Epson WorkForce Pro WF-3730 Series - Fax Troubleshooting and Problems; Received Faxes Are Not Printed; Blank or Small Amount of Text on Second Page of Received Faxes; Other Faxing Problems

Related Information
& “Fax Settings” on page 129
Received Faxes Are Not Printed
❏ If an error has occurred on the printer, such as a paper jam, the printer cannot print received faxes. Check the
printer.
❏ If the printer has been set to save received faxes in the inbox or the condential box, the received faxes are not
automatically printed. Check the Receive Settings.
Related Information
& “Saving Received Faxes in the Inbox” on page 124
& “Removing Jammed Paper” on page 175
Pages are Blank or only a Small Amount of Text is Printed on the
Second Page in Received Faxes
You can print on one page by using the Delete Print Data
Aer
Split feature in Split Page Settings.
Select Delete Top or Delete Bottom in Delete Print Data Aer Split, and then adjust reshold. Increasing the
threshold increases the amount deleted; a higher threshold gives you a higher possibility of printing on one page.
Other Faxing Problems
Cannot Make Calls on the Connected Telephone
Connect the telephone to the EXT. port on the printer, and pick up the receiver. If you cannot hear a dial tone
through the receiver, connect the phone cable correctly.
Related Information
& “Connecting Your Phone Device to the Printer” on page 111
Answering Machine Cannot Answer Voice Calls
On the control panel, set the printer's Rings to Answer setting to a number higher than the number of rings for
your answering machine.
Related Information
& “Settings for the Answering Machine” on page 121
& “Basic Settings” on page 134
User's Guide
Solving Problems
203