Epson WorkForce Pro WF-3730 Series - Other Scanning Problems; Scanning Speed Is Slow; Cannot Send the Scanned Image by Email; Scanning Stops When Scanning to Pdf;Multi-TIFF

Related Information
& “Uninstalling Applications” on page 169
& “Installing Applications” on page 170
Other Scanning Problems
Scanning Speed Is Slow
❏ Lower the resolution, and then scan again. When the resolution is high, scanning may take some time.
❏ e scanning speed may be reduced depending on the image adjustment features in Epson Scan 2.
❏ On the Conguration screen which is displayed by clicking the
button in Epson Scan 2, if you set Quiet
Mode on the Scan tab, the scanning speed may be reduced.
Related Information
& “Scanning Using Epson Scan 2” on page 103
Cannot Send the Scanned Image by Email
Make sure you have congured the email server settings.
Scanning Stops when Scanning to PDF/Multi-TIFF
❏ When scanning using Epson Scan 2, you can continuously scan up to 999 pages in PDF format and up to 200
pages in Multi-TIFF format. When scanning using the control panel, you can continuously scan up to 50 pages
in single-sided scanning using the ADF, and up to 100 pages in 2-sided scanning using the ADF and when
scanning using the scanner glass.
❏ When scanning large volumes, we recommend scanning in grayscale.
❏ Increase the free space on the computer's hard disk. Scanning may stop if there is not enough free space.
❏ Try scanning at a lower resolution. Scanning stops if the total data size reaches the limit.
Related Information
&
“Scanning Using Epson Scan 2” on page 103
Problems when Sending and Receiving Faxes
Cannot Send or Receive Faxes
❏ Use Check Fax Connection on the control panel to run the automatic fax connection check. Try the solutions
printed on the report.
User's Guide
Solving Problems
198