Epson WorkForce Pro WF-3730 Series - Updating Applications and Firmware; Updating the Printers Firmware Using the Control Panel

3. Install the applications by following the instructions on the website below.
http://epson.sn
Note:
If you are using a Windows computer and you cannot download applications from the website, install them from the
soware disc that came with the printer.
Updating Applications and Firmware
You may be able to clear certain problems and improve or add functions by updating the applications and the
rmware. Make sure you use the latest version of the applications and rmware.
1. Make sure that the printer and the computer are connected, and the computer is connected to the internet.
2. Start EPSON Soware Updater, and update the applications or the rmware.
c
Important:
Do not turn o or unplug the printer until the update is complete; otherwise, the printer may malfunction.
Note:
If you cannot nd the application you want to update in the list, you cannot update using the EPSON Soware
Updater. Check for the latest versions of the applications from your local Epson website.
http://www.epson.com
Related Information
& “EPSON Soware Updater” on page 168
Updating the Printer's Firmware using the Control Panel
If the printer is connected to the Internet, you can update the printer's rmware using the control panel. You can
also set the printer to regularly check for rmware updates and notify you if any are available.
1. Tap Settings on the home screen.
2. Tap Firmware Update > Update.
Note:
Tap
Notication
> On to set the printer to regularly check for available
rmware
updates.
3. Check the message displayed on the screen and tap Start Checking.
e
printer starts searching for available updates.
User's Guide
Network Service and Software Information
171