Epson WorkForce Pro WF-3730 Series - Page 154

Auto Select Settings:
Select On for any of following settings to automatically print on paper from any sources
containing paper that matches your paper settings.
❏ Copy
❏ Fax
❏ Other
Error Notice:
Select On to display an error message when the selected paper size or type does not match the
loaded paper.
Paper Setup Auto Display:
Select On to display the Paper Setting screen when loading paper in the paper source. If you
disable this feature, you cannot print from an iPhone or iPad using AirPrint.
Universal Print Settings:
ese print settings are applied when you print by an external device without using the printer driver.
Top Oset:
Adjust the top margin of the paper.
Left
Oset
:
Adjust the
le
margin of the paper.
Top Oset in Back:
Adjust the top margin for the back of the page when performing 2-sided printing.
Left Oset in Back:
Adjust the
le
margin for the back of the page when performing 2-sided printing.
Check Paper Width:
Select On to check the paper width before printing. is prevents printing beyond the edges of
the paper when the paper size setting is incorrect, but this may lower the print speed.
Skip Blank Page:
Skips blank pages in the print data automatically.
Auto Error Solver:
Select an action to perform when a 2-sided printing error or a memory full error occurs.
❏ On
Displays a warning and prints in single-sided mode when a 2-sided printing error occurs, or prints
only what the printer could process when a memory full error occurs.
❏
O
Displays an error message and cancels printing.
User's Guide
Menu Options for Settings
154