Epson WorkForce Pro WF-C4810 Series - Page 278

Related Information
& “Loading Paper” on page 29
Network Settings
Select the menus on the control panel as described below.
Settings > General Settings > Network Settings
Wi-Fi Setup:
Set up or change wireless network settings. Choose the connection method from following and then
follow the instructions on the control panel.
Wi-Fi (Recommended):
❏ Wi-Fi Setup Wizard
❏ Push Button Setup(WPS)
❏ Others
❏ PIN Code Setup(WPS)
❏ Wi-Fi Auto Connect
❏ Disable Wi-Fi
You may be able to resolve network problems by disabling the Wi-Fi settings or making
the Wi-Fi settings again. Tap
> Wi-Fi (Recommended) > Change
Settings > Others > Disable Wi-Fi > Start Setup.
Wi-Fi Direct:
❏ iOS
❏ Android
❏ Other OS Devices
❏ Change
❏ Change Network Name
❏ Change Password
❏ Change Frequency Range
is
setting may not be displayed depending on the region.
❏ Disable Wi-Fi Direct
❏ Restore Default Settings
Wired LAN Setup:
Set up or change a network connection that uses a LAN cable and router. When this is being used,
Wi-Fi connections are disabled.
Network Status:
Displays or prints the current network settings.
Product Information > Settings Menu List > General Settings
278