Epson WorkForce Pro WF-C4810 Series - Page 279

❏ Wired LAN/Wi-Fi Status
❏ Wi-Fi Direct Status
❏ Email Server Status
❏ Print Status Sheet
Connection Check:
Checks the current network connection and prints a report. If there are any problems with the
connection, see the report to solve the problem.
Advanced:
Make the following detailed settings.
❏ Device Name
❏ TCP/IP
❏ Proxy Server
❏ Email Server
❏ IPv6 Address
❏ MS Network Sharing
❏ Link Speed & Duplex
❏ Redirect HTTP to HTTPS
Related Information
& “Making Wi-Fi Settings by Entering the SSID and Password” on page 237
& “Making Wi-Fi Settings by Push Button Setup (WPS)” on page 238
& “Making Wi-Fi Settings by PIN Code Setup (WPS)” on page 239
& “Connecting a Smart Device and Printer Directly (Wi-Fi Direct)” on page 240
& “Printing a Network Connection Report” on page 251
& “Checking the Network Connection Status” on page 249
Web Service Settings
Select the menus on the control panel as described below.
Settings > General Settings > Web Service Settings
Epson Connect Services:
Displays whether the printer is registered and connected to Epson Connect.
You can register to the service by selecting Register and follow the instructions.
When you have registered, you can change the following settings.
❏ Suspend/Resume
❏ Unregister
For details, see the following web site.
https://www.epsonconnect.com/
Product Information > Settings Menu List > General Settings
279