Epson WorkForce Pro WF-C879RBAM - Adjusting Print Quality Per Paper

Adjusting Print Quality per Paper
Making the print quality settings per paper. Plain paper, recycle paper, high quality plain paper, preprinted paper,
color paper, letterhead paper, and thick paper is supported.
1.
Load paper which you want to adjust the print quality in the printer.
2.
Select Settings on the home screen on the printer's control panel.
3.
Select Maintenance > Print Quality Adjustment per Paper.
If the item is not displayed, ick the screen upward to display it.
4.
Select how to adjust from Print Pattern or Enter Set Value.
5.
Select the paper type you loaded in the printer.
6.
Follow the on-screen instructions to align the print head.
is pattern aligns if you see horizontal banding at regular intervals.
Find and enter the number for the least separated and overlapping pattern.
Note:
When you print the paper that can be adjusted the quality, select Auto Select (plain papers) on Paper Type for printer
driver, so adjustment value is automatically applied.
7.
Close the information screen.
If the print quality is not improved aer performing this adjustment, performPrint Quality Adjustment to set
the standard adjustment values, and then perform adjustments again according to the paper type.
Maintaining the Printer > Improving Print, Copy, Scan, and Fax Quality > Adjusting Print Quality per Paper
181