Epson WorkForce Pro WF-C879RBAM - Problems with the Manual Stapler

e following is the code for the cartridge.
Staple Cartridge : C12C934911
*
*Contains at least 1000 staples.
c
Important:
❏ Do not remove the cartridge except to clear a staple jam or to replace it with a new one.
❏ Do not open the part
A
shown below.
Problems with the Manual Stapler
Staples Jam
Check the error displayed on the control panel and follow the instructions to remove the jammed staples.
e
LCD
screen displays an animation that shows you how to remove jammed staples. Next, select OK to clear the error.
c
Important:
❏ Do not remove the cartridge except to clear a staple jam or to replace it with a new one.
❏ Do not open the part
A
shown below if not instructed to do so.
❏ Do not remove the cartridge when staples remain in the cartridge. You need to replace it with a new cartridge as
a staple jam is likely to occur even if you reinstall it.
❏ You need to test staple twice or so aer clearing a staple jam.
Using Optional Items > Manual Stapler > Problems with the Manual Stapler
339