Wiring Codes with Clamps
Wire codes using clamps as shown below.
Printer Stand
c
Important:
When installing the printer on the oor, install the printer stand. e printer may fall without the printer stand.
❏ When carrying the printer, be sure to li it in a stable position. Liing the printer while it is unstable may result
in injury.
❏ Because this printer is heavy, it should always be carried by four or more people when unpacking and
transporting.
❏ Because this printer stand is heavy, it should always be carried by two or more people when unpacking and
transporting.
Installing the Printer Stand
e printer stand can be attached to the printer and the paper cassette units.
Using Optional Items
>
Printer Stand
>
Installing the Printer Stand
322
To Next Page
Loading...
