Epson WorkForce Pro WF-C879RBAM - Moving and Transporting the Printer; Moving the Printer

4.
Follow the on-screen instructions.
Moving and Transporting the Printer
!
Caution:
❏ When carrying the printer, li it using a stable position. Liing the printer using an unstable position may result
in injury.
❏ Because this printer is heavy, it should always be carried by four or more people when unpacking and
transporting.
❏ When liing the printer, place your hands in the positions shown below. If you li the printer holding other
positions, the printer may fall or you may trap your ngers when placing the printer.
❏ When carrying the printer, do not tilt it more than 10 degrees; otherwise the printer may fall.
Moving the Printer
!
Caution:
Do not attach the output tray to the ADF as it is unstable. If the printer moves unexpectedly while it is being moved,
you may be injured.
1.
Turn o the printer by pressing the
P button.
2.
Make sure the power light turns o, and then unplug the power cord.
c
Important:
Unplug the power cord when the power light is
o.
Otherwise, the print head does not return to the home
position causing the ink to dry, and printing may become impossible.
3.
Disconnect all cables such as the power cord and USB cable.
4.
Make sure there is no external USB device inserted.
5.
Remove all of the paper from the printer.
Maintaining the Printer > Moving and Transporting the Printer > Moving the Printer
190