Epson WorkForce Pro WF-C879RBAM - Settings When Using an Additional Network

c
Important:
Do not remove the cover of the ethernet board.
Do not touch the terminals of the ethernet board.
5.
Secure the ethernet board with the two screws.
6.
Connect the removed power cord and USB cable.
7.
Press the
button, select the Job/Status > Options, and then conrm if the ethernet board is installed
correctly.
8.
Select Settings > General Settings > System Administration > Firmware Update > Update to update the
rmware.
Settings when Using an Additional Network
Administrator Password Setting for Additional Network
When you set an administrator password for the additional network, you can prevent users from changing
additional network settings. You can set and change the administrator password for the additional network using
Web Cong from a computer on the additional network. e administrator password for the additional network
and for the printer are dierent.
e
initial password for the additional network is the last eight digits of the MAC address. To check this, select
Wired LAN Status for the additional network on the printer's control panel to display the details. You can also
conrm
the MAC address on the label stuck to the Ethernet board.
We recommend that you change the initial password as soon as possible to prevent unauthorized access. If you
reset the additional network to the default settings, the initial password will be restored.
Related Information
& “Menu Options for Network Settings (When Using an Additional Network)” on page 355
Conguring the Administrator Password for the Additional Network
You can set the administrator password using Web
Cong
from a computer on the additional network.
1.
Enter the printer's IP address for the additional network into a browser to access Web Cong.
2.
Select the Product Security tab > Change Administrator Password.
3.
Enter a password to New Password and
Conrm
New Password. Enter the user name, if necessary.
If you want to change the password to new one, enter a current password.
Using Optional Items > Ethernet Board (10/100/1000 Base-T, Ethernet) > Settings when Using an Additional Ne …
349