Installing an Ethernet Board
!
Caution:
Make sure you turn o the power, unplug the power cord, and check that all wiring has been disconnected. e cord
may be damaged, resulting in electric shock or re.
c
Important:
Electrostatic discharge can damage printer parts. Make sure you discharge static electricity from your body by
touching grounding yourself before installing the ethernet board.
1.
Turn o the printer by pressing the
P
button.
2.
Disconnect all cables such as the power cord and USB cable.
3.
Loosen the two screws and then remove the cover.
4.
Install the ethernet board straight into the additional interface slot for the ethernet board.
Insert the ethernet board rmly into the slot.
Using Optional Items
>
Ethernet Board (10/100/1000 Base-T, Ethernet)
>
Installing an Ethernet Board
348
To Next Page
Loading...
