Epson WorkForce Pro WF-C879RBAM - Replacing Maintenance Rollers in Paper Cassette 2 to 4

14.
Insert the
sha
of the new maintenance roller into the hole in the holder, and then slide the
sha
on the lever
side along the slot while it is facing the at surface at the front.
15.
Lock the lever.
16.
Insert the paper cassette.
17.
Turn on the printer, s elect Settings > Maintenance > Maintenance Roller Information>Reset Maintenance
Roller Counter, and then select the paper cassette in which you replaced the maintenance rollers.
Related Information
& “Maintenance Rollers Codes” on page 365
Replacing Maintenance Rollers in Paper Cassette 2 to
4
ere are two places for replacing the maintenance rollers: on the back of the printer (two rollers) and on the paper
cassette (one roller).
Maintaining the Printer > Replacing Maintenance Rollers in Paper Cassette 2 to 4
197