Epson WorkForce Pro WF-C879RBAM - Printer Stand Specifications; Paper Cassette Unit; Installing the Paper Cassette Units

Related Information
& “Moving the Printer” on page 190
Printer Stand
Specications
Dimensions ❏ Width: 772mm(30.4 in.)
❏ Depth: 797 mm (31.4 in.)
❏ Height: 116 mm (4.6in.)
(When installing: 83 mm (3.3in.))
Weight Approx. 30.5 kg (67.2 lb)
Related Information
& “Installation Location and Space” on page 418
Paper Cassette Unit
Installing the Paper Cassette Units
You can install up to 3 paper cassette units.
!
Caution:
❏ Make sure you turn
o
the printer, unplug the power cord from the printer, and disconnect any cables before
starting installation. Otherwise, the power cord may be damaged resulting in re or electric shock.
❏ When liing the printer, place your hands in the positions shown below. If you li the printer holding other
positions, the printer may fall or you may trap your ngers when placing the printer.
c
Important:
If you are using the printer stand, install it under the bottom of the paper cassette unit in advance.
1.
Turn o the printer by pressing the
P button, and then unplug the power cord.
Using Optional Items > Paper Cassette Unit > Installing the Paper Cassette Units
329