Epson WorkForce Pro WF-C879RBAM - Setting the Paper Cassette Unit in the Printer Driver

14.
Insert the output tray.
15.
Reconnect the power cord and any other cables, and then plug in the printer.
16.
Turn on the printer by pressing the
P button.
17.
Press the
button, and check that the paper cassette unit that you installed is displayed on the Paper Setting
screen.
Note:
When uninstalling the paper cassette unit, turn o the printer, unplug the power cord, disconnect any cables, and then
perform the installation procedure in reverse.
Proceed with the printer driver settings.
Related Information
& “List of Optional Items” on page 320
& “Installing the Printer Stand” on page 322
& “Wiring Codes with Clamps” on page 322
Setting the Paper Cassette Unit in the Printer Driver
To use the installed paper cassette unit, the printer driver needs to acquire the necessary information.
Setting the Paper Cassette Unit in the Printer Driver - Windows
Note:
Log on to your computer as an administrator.
1.
Open the printer list on the computer.
❏ Windows 10/Windows Server 2019/Windows Server 2016
Click on the start button, and then select Windows System > Control Panel > View devices and printers
in Hardware and Sound.
Using Optional Items > Paper Cassette Unit > Setting the Paper Cassette Unit in the Printer Driver
334