Epson WorkForce Pro WF-C879RBAM - Encrypted Communication Using Ipsec;Ip Filtering

2.
Specify a
certicate
to use on Server
Certicate
.
❏ Self-signed Certicate
A self-signed certicate has been generated by the printer. If you do not obtain a CA-signed certicate,
select this.
❏ CA-signed Certicate
If you obtain and import a CA-signed certicate in advance, you can specify this.
3.
Click Next.
A
conrmation
message is displayed.
4.
Click OK.
e
printer is updated.
Related Information
& “Application for Conguring Printer Operations (Web Cong)” on page 374
& “Conguring a CA-signed Certicate” on page 534
& “Updating a Self-signed Certicate” on page 538
Encrypted Communication Using IPsec/IP Filtering
About IPsec/IP Filtering
You can lter trac based on IP addresses, services, and port by using IPsec/IP Filtering function. By combining of
the ltering, you can congure the printer to accept or block specied clients and specied data. Additionally, you
can improve security level by using an IPsec.
Note:
Computers that run Windows Vista or later or Windows Server 2008 or later support IPsec.
Conguring Default Policy
To lter trac, congure the default policy. e default policy applies to every user or group connecting to the
printer. For more ne-grained control over users and groups of users, congure group policies.
1.
Access Web
Cong
and then select the Network Security tab > IPsec/IP Filtering > Basic.
2.
Enter a value for each item.
3.
Click Next.
A conrmation message is displayed.
4.
Click OK.
e printer is updated.
Administrator Information > Advanced Security Settings > Encrypted Communication Using IPsec/IP Filtering
541