Epson WorkForce Pro WF-C879RBAM - Controlling Using Protocols

2.
Select Restore from Backup.
When the administrator password has been set, enter the password and tap OK.
3.
Connect the USB memory that contains the encryption key to the printer's external interface USB port.
4.
Tap Restore from Backup.
e encryption key is restored to the TPM chip.
5.
Check the message, and then tap OK.
e printer restarts.
Controlling Using Protocols
You can print using a variety of pathways and protocols.
If you are using a multi-function printer, you can use network scanning and PC-FAX from an unspecied number
of network computers.
You can lower unintended security risks by restricting printing from
specic
pathways or by controlling the
available functions.
Controlling protocols
Congure
the protocol settings.
1.
Access Web Cong and then select the Network Security tab > Protocol.
2.
Congure each item.
3.
Click Next.
4.
Click OK.
e settings are applied to the printer.
Related Information
& “Application for Conguring Printer Operations (Web Cong)” on page 374
& “Protocols you can Enable or Disable” on page 528
& “Protocol Setting Items” on page 529
Protocols you can Enable or Disable
Protocol Description
Bonjour Settings You can specify whether to use Bonjour. Bonjour is used to search for devices, print, and so
on.
Administrator Information > Advanced Security Settings > Controlling Using Protocols
528