Epson WorkForce Pro WF-C879RBAM - Environmental Specifications; Installation Location and Space

Environmental Specications
Operation Use the printer within the range shown in the following graph.
Temperature: 10 to 35°C (50 to 95°F)
Humidity: 20 to 80% RH (without condensation)
Storage
Temperature: -20 to 40°C (-4 to 104°F)
*
Humidity: 5 to 85% RH (without condensation)
* You can store for one month at 40°C (104°F).
Environmental Specications for Ink Supply Units
Storage Temperature
-30 to 40 °C (-22 to 104 °F)
*
Freezing Temperature -20 °C (-4 °F)
Ink thaws and is usable after approximately 5 hours at 25 °C (77 °F).
* You can store for one month at 40 °C (104 °F).
Installation Location and Space
To ensure safe use, place the printer in a location that meets the following conditions.
❏ A
at,
stable surface that can support the weight of the printer
❏ Locations that do not block or cover the vents and openings in the printer
❏ Locations where you can load paper and remove paper easily
❏ Locations that meet the conditions in the "Environmental
Specications"
in this manual
Product Information > Product Specications > Installation Location and Space
418