Paper slips when paper dust adheres to the roller.
Solutions
Clean the roller.
& “Improving Paper Feeding Problems for Paper Cassette” on page 170
Paper Feeds at a Slant
e
following causes can be considered.
The installation location is inappropriate.
Solutions
Place the printer on a at surface and operate in the recommended environmental conditions.
& “Environmental Specications” on page 418
Unsupported paper is being used.
Solutions
Use paper supported by this printer.
& “Available Paper and Capacities” on page 358
& “Unavailable Paper Types” on page 364
Paper handling is inappropriate.
Solutions
Follow paper handling precautions.
& “Paper Handling Precautions” on page 37
The paper is loaded incorrectly.
Solutions
Load paper in the correct direction, and slide the edge guide against the edge of the paper.
& “Loading Paper” on page 39
The paper settings on the printer are incorrect.
Solutions
Make sure the paper size and paper type settings match the actual paper size and paper type loaded in the
printer.
& “Paper Size and Type Settings” on page 38
Paper slips when paper dust adheres to the roller.
Solutions
Clean the roller.
& “Improving Paper Feeding Problems for Paper Cassette” on page 170
Solving Problems
>
The Printer Does Not Work as Expected
>
Paper Does Not Feed or Eject Correctly
206
To Next Page
Loading...
